1-800-440-5582

CT8030
Dual Display Professional Automotive Multimeter

Currently Unavailable

  • Simple and easy to use
  • The more ergonomic profile compared with previous models makes handling and operation easier and more convenient
  • Single knob selects function and range
  • Rugged plastic enclosure
  • Soft anti-slip rubber holster protects the instrument against impacts and chemicals
  • Large easy to read 1/2" (12.5 mm) digits display
  • Design allows comfortable hand holding or resting at convenient places horizontally or at an angle by using the stand at the back of the holster

Features

General Technologies Corp. CT8030 Professional Automotive Multimeter

Technical Specifications


Electrical Specifications

  • DC Voltage: 0 to ± 1000V, ±0.3% ± 2 dgts., 10MΩ input impedance
  • AC Voltage: 0 to 750V, ±2.5% ± 5 dgts., 10MΩ input impedance, 50 to 500 Hz
  • DC Current: 0 to ± 10A, ± 0.8 % ± 4 dgts.,
  • AC Current: 0 to 10A, ± 0.8 % ± 4 dgts.
  • Resistance: 0 to 40 MΩ ± 0.8% ± 5 dgts.,
  • Frequency: 0 to 20 KHz, ± 0.01 % ± 2 dgts.
  • Tachometer: 30 to 20000 RPM, ± 2 RPM
  • Dwell: 0 to 360º, ± 1.2°/ krpm/cyl + 2d
  • Fuel Injector (pulse width): 0.05 to 250 mS, ± 0.05 mS +1d
  • Oxygen Test: Measures cross count up to 10/Second
  • Alternator Test: Measures output voltage ripple, beeps if ripple exceeds 0.45V
  • Fault code reader: Retrieves blink type fault codes
  • DTC Decoder: Retrieves Impulse Code Diagnostic Trouble Codes
  • Diode test: 2.4 ± 0.6 mA test current, 3.2 V max. test voltage
  • Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 100 Ohm
  • Temperature: -20º to 1000°C or 0°F to 1832°F (±2% + 1 dgts.)

Applications

  • Measure engine RPM, ignition dwell angle, and temperature of exhaust manifold, cooling system, air conditioning, heating system, catalytic converter, etc.
  • Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.
  • Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
  • Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
  • An essential tool for all around troubleshooting of electrical and electronic circuit and systems

For use in

  • Automobiles
  • Trucks
  • Trailers
  • Boats
  • RVs
  • 0 to 600 Volt AC/ DC powered circuits.

Includes

  • CT8030
  • Protective holster
  • Hard padded case for carrying and storage
  • Two test probes, One red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II), 35½" long
  • One K Type thermocouple probe for temperature measurements
  • Two alligator clip adaptors
  • Two DTC connector probes
  • Inductive Pickup for RPM measurements
  • 9 V alkaline battery
  • User's Manual