1-800-440-5582


CT8015

Manual Range Digital Multimeter

Brochure


Parts


Manual


Video
  • Quick and simple to use
  • The smaller and ergonomic profile compared with previous models makes handling and operation easier and more convenient
  • Single knob selects function and range
  • Rugged plastic enclosure
  • Soft anti-slip rubber holster protects the instrument against impacts and chemicals
  • Large easy to read 1/2" (12.5 mm) digits display
  • Design allows comfortable hand holding or resting at convenient places horizontally or at an angle by using the stand at the back of the holster

Features

  • State of the Art ergonomic design and styling for easier handling and use
  • Full control manual range selection
  • Large 3½ digit LCD display
  • AC/DC Voltage measurement up to 600 Volt
  • DC Current measurement up to 10 A
  • Resistance measurement up to 2 MOhm
  • Transistor (hFE) and diode test
  • Continuity Test
  • Overload protection
  • Soft holster for instrument protection
  • Auto power off

Technical Specifications

  • Display:
  • 3½ Digit LCD (Max reading 1999)
  • 1/2"(12.5 mm) Digits
  • High Voltage warning indicator
  • Automatic( - ) negative polarity indicator
  • Automatic Zeroing
  • Automatic over-range indication
  • Low battery indicator
  • Power source: Standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22
  • Test probes: One red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II), 35½" long
  • Physical dimensions: 5.51" (H) x 2.75" (W) x 1.41" (D) (140 x 70 x 36 mm )
  • Weight: Approximately 12.34 Oz ( 350 g) Including battery

Electrical Specification

  • DC Voltage: ±0.8% ± 1dgts., 1MOhm input impedance, 600 V ac/dc Overload protection
  • AC Voltage: ±1.5% ± 10 dgts., 450KOhm input impedance, 40 to 200 Hz, 600 V ac/dc Overload protection
  • Resistance: ±1.0% ± 3 dgts., 250 V ac/dc Overload protection
  • DC Current: ± 1.0 % ± 2 dgts., Internal 200mA/10A 250V fuse protection
  • Diode test: 1.4 ± 0.6 mA test current, 3.2 V max. test voltage
  • Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 100 Ohm
  • Transistor Test: hFE value from 0 to 1000 of npn and pnp transistors

Applications

  • Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.
  • Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
  • Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
  • An essential tool for all around troubleshooting of electrical and electronic circuit and systems.

Ergonomic Features

  • Automobiles
  • Trucks
  • Trailers
  • Boats
  • RVs
  • 0 to 600 Volt AC/ DC powered circuits

Includes

  • CT8015
  • Protective holster
  • Soft pouch for carrying and storage
  • Two test probes, one red and one black 35½" (0.9 m) long each
  • 9 Volt Alkaline
  • User's Manual