NOTE: this procedure applies to units with S/N:23121501 and above only. 1- Connect the GTC505 to a computer’s USB port, using the supplied micro-USB cable.2- Upon detecting the USB connection, the GTC505 should show the charging screen.3- Press the “POWER/CLEAR” button until the unit turns off.4- Press and hold the “HOLD” button, and while the […]
GTC505 Firmware Update Procedure Read More »
The GTC063 is a set of fuse socket connectors, which includes six sizes: ATC/ATO, Mini, Maxi, Low-profile Mini, Micro-2 and Micro-3. These fuse socket connectors are ergonomically designed for easy insertion and extraction, have standard size connection tabs, and are built with corrosion-resistant electrical contacts for maximum conductivity and durability, and molded over with an
GTC063 Fuse Socket Connector Set Read More »
The GTC605 Fuel Injection Analyzer is a new type of handheld instrument capable of quick diagnosis and performance measurement of solenoid, piezoelectric, and mechanical fuel injectors used in diesel, gasoline, and liquid natural gas engines. With the GTC605 there is no need to remove the fuel injector from the engine, back-probe connectors, or probe wires.
GTC605 Fuel Injection Analyzer Release Announcement Read More »
General Technologies Corp., has launched an expanded set of fuse socket connectors, which now includes six sizes: ATC/ATO, Mini, Maxi, Low-profile Mini, Micro-2 and Micro-3. These fuse socket connectors are ergonomically designed for easy insertion and extraction, have standard size connection tabs, and are built with nickel-plated electrical contacts in an ABS plastic insulating body.
GTC060 Fuse Socket Connector Release Announcement Read More »
The GTC505m Engine Ignition Analyzer is a handheld instrument capable of diagnosis and performance measurement of all types of spark ignition systems, including magneto, CDI, distributor, waste spark and coil on plug in use. This hand-held device is powered by a rechargeable lithium battery, which provides up to 8 hours of battery life and uses
GTC505m Engine Ignition Analyzer with Clip-On Sensor and Cable Release Announcement Read More »
The GTC505-CSC is designed for use with the GTC505 Engine Analyzer and allows for measurement of ignition systems in hard-to-reach places, from a remote position. This accessory consists of an 83.5” (212 cm) long coaxial cable, and a shielded clip-on spark plug wire sensor. The cable can also be used with the standard sensors supplied
GTC505-CSC 2 m Cable and Clip-on Sensor for GTC505 Read More »
The GTC505 is a complete ignition system analyzer, compatible with all common types of spark ignition systems. The GTC505 can: Display waveforms in real time Compare readings between cylinders Detect and display dwell angle and primary current ramp time Chart burn time, spark plug voltage, dwell/ramp time, and RPM for each spark, allowing for detection
GTC505 Engine Ignition Analyzer Read More »
Designed for quick and easy use, this new tachometer requires only a connection to the vehicle’s battery or cigarette lighter socket to measure engine RPM. No sensors, reflective tapes, etc. are necessary, because the TA303 uses the ripples generated by the engine’s alternator to automatically calculate its speed, so it can be used on any
TA303 Diesel & Gasoline Engine Tachometer Read More »
General Technologies Corp’s, new TA500 SmarTach+COP is the first tool of its kind in the industry capable of testing and diagnosing ignition systems on engines using: Coil on Plug, Coil near Plug, DIS (Distributor-less) or waste spark, magneto and conventional distributor/ignition coil technologies.Simple to use, the TA500 requires no special adapters, cables or a scope
TA500 Multisystem Ignition Analyzer Read More »
General Technologies Corp. started shipping the new and enhanced TA100 Smartach+. This new version of the popular wireless tachometer and secondary ignition voltage meter, incorporates many new features, like a rugged flexible antenna, protective rubber holster, enhanced detection range for the tachometer function, more accurate secondary ignition voltage measurements, maximum and minimum display, a function
TA100 Digital Tachometer and Engine Analyzer Read More »